Juniper-systems Archer 2 Quick Start User Manual download pdf

1 Loosen the 4 captive screws on the battery door with a #1 Phillips screwdriver. Remove the door.

CAUTION: The handheld is not sealed when the door is removed.

2 Place the battery pack into the compartment. Be sure to line up the and .

3 Replace the battery door and tighten the screws.

4 Plug the AC power charger into a wall socket and the DC jack on the handheld.

5 The handheld powers on and several screens appear. When the Time screen is shown make adjustments if

needed and select OK.

6 Charge the battery pack at room temperature for 5 hours.

The operating system, manual and quick start guide is available in English, Spanish, French, German,

and Brazilian Portuguese. Go to our website at www.junipersys.com/Archer-2/support.

Power Button &

LED Indicators

Battery Door

Screws

12-24VDC JackUSB Client

Connector Module 9-pin Serial Port

Handstrap Tether

Microphone/Speaker Jack USB Host

Battery Pack SIM & SD Card Slots

Touchscreen Camera Lens (opt)

Bumper Barcode Window (opt)

Speaker

Perform Initial Tasks

Microphone Camera Flash/Flashlight (opt)

Stylus

Handstrap

1 Loosen the 4 captive screws on the battery door with a #1 Phillips screwdriver. Remove the door. CAUTION: The handheld is not sealed when the do

Juniper-systems Archer 2 Quick Start User Manual