Juniper-systems Trimble Lassen GPS Expansion Pod User Manual

10  Field PC GPS Expansion PodTips for Using the GPS Expansion PodKeep the following tips in mind while using the Field PC with the GPS Expansion Pod:

GPS Expansion Pod 11GPS Antenna Bracket RemovalThe GPS antenna bracket can be removed and reaached depending on your needs. To remove the GPS antenn

2  Field PC GPS Expansion PodGPS Expansion PodThe GPS Expansion Pod integrates the Trimble Lassen LP GPS receiver with the Field PC. The Field PC rema

GPS Expansion Pod 3Attaching the Antenna BracketBefore you can use the GPS Expansion Pod, you must attach the antenna bracket using the GPS Pod Setup

4  Field PC GPS Expansion Pod7. Aach the antenna on the antenna bracket.8. Remove the protective cap from the connector labeled GPS ANT (save the c

GPS Expansion Pod 51. Go to Start > Programs > GPS Pod Setup, and the GPS Receiver Port Seings screen opens.At the bottom of the screen, ther

6  Field PC GPS Expansion PodReset ReceiverThe Reset Receiver buon returns all of the seings on the GPS receiver to their default seing. This funct

GPS Expansion Pod 7your Field PC to match your program. If you change the seings on your Field PC, tap on Apply Seings. The COM Port and Data Bit

8  Field PC GPS Expansion PodTSIP FormatThe TSIP is the default seing for the GPS Expansion Pod. The seings are COM Port: COM3, Protocol: TSIP, Baud

GPS Expansion Pod 9Aer the seings have been selected, tap on the Apply Seings buon to save the new seings. Tap on the Get Seings buon to bring